Jump to content
Sign in to follow this  

EAP 1250 Band Steering problem

Recommended Posts

I have an application with 3 VLANS and want to use band steering to push traffic to 5.0 GHz preferably.  I set the transmit power at 13 dBm (-13 dBm actually) and 19 dBm for the 2.4 and 5.0 GHz bands respectively.  Each VLAN is set for the same security (WPA Mixed) on both 2.4 and 5.0 GHz bands.  VLAN1 has the same SSID and same PSK on both bands; VLAN 30 has the same SSID and same PSK on both bands; VLAN 40 has the same SSID and same PSK on both bands.  The PSK differs from one VLAN to the next.


When I go to save the band steering I receive the error “order for Band Steering function to work properly, both 2.4GHz and 5GHz SSID and Security Settings must be the same” and it does not save.  However they ARE the same. 


The firmware is the latest available,


The VLANS are vlan 1, 30, and 40 as was set up on the router and this works for wired connections.


Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  


Important Information

By using this site, you agree to our Terms of Use.