Jump to content

Recommended Posts

So my ENH1750EXT seems to have a mind of its own.  I have a stationary client on the 2.4Ghz band of the AP and the AP seems to randomly stop communicating to the client.  The client is set on a staic IP and is well within range and line of sight.  The only way I can reestablish communications to the client from the AP is to reboot the AP.  This stationary client is my test platform for full mobilization when I expect to have from 20-40 roaming clients on the AP across both bands.  Is there a reason or known issue for this to be happening?

Share this post


Link to post
Share on other sites

Firmware is current based on your website, 2.0.152.  The 2.4Ghz client is a weather station wifi modem that is asleep most of the time, and only awake when it needs to transmit. Approximately every 5 minutes or so. 

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.