Search the Community
Showing results for tags 'wireless'.
Found 4 results
Can any help me with my issue. I have recently Deployed Neutron Series AP EWS 360AP with Controller Switch all AP's are POE powered , sometimes in some of AP's my UPlink is disconnected and due moisture in air but power over Ethernet is working , due to this AP's still broadcasting the signal , i wanted that if my AP uplink disconnected it stops broadcasting signal or client unable to connect to that AP which do not have any uplink ?
I recently purchased two brand new ac 1200H wireless access points. I installed one in my Procurement office which is working fantastic, and the other in my Accounting Office which is having issues. If I try and create an SSID (or use the default built in networks on either 2.4 or 5G), the signal strength appears fine, but it takes forever for the client device to obtain an ip address (for my network, it would be 10.8.8.x). Once it does, it usually says No Internet. If by some miracle, you do get a connection, the speed test comes back at less the 1MB ( I have 50MB internet). Interesting enough, if I use the built in guest network (this appears to assign clients a 192.168.100.x address), not only does it connect, but it's blazing fast. This works fine for my guests, but I need internal employees to be able to connect to the regular network so that they can browse network resources and access network printers. I've been struggling with this for the last 3 days. Any help is greatly appreciated. Thanks in advance.
I have an EWS7928FP configured with VLAN100. Attached to the switch is an AP Group with the VLAN100 labeled ACCT. We can connect to the wireless VLAN100 fine. The problem is the printers and some workstation are also configured on the VLAN100. This wireless users cannot access the wired printers or workstations. Any ideas?
Hajj Case Study.pdf