Search the Community
Showing results for tags 'marina'.
Found 2 results
Hi, marina wifi signal is fairly strong and fast right outside my boat but the moment I enter the boat it's very weak and unreliable. My only goal is to receive the signal outside and bring it inside the boat without losing much of it. The wifi signal appears very finicky to connect to with typical range extenders. They can never connect an report that they could not be assigned an IP address. However all devices connect to the signal just fine when outside the boat. Trying to use the ENS202EXt to receive the signal outside, then connect the CAT5 output to a regular router which will let devices connect wireless inside the boat. Would be very helpful if you could help with some questions I'm not seeing anywhere else. Connection Mode: Client Bridge, correct, if being connected to a typical house router inside the boat which will be the access point for users in the boat. IP Settings: What are the recommended WAN/LAN IP settings in this scenario, dhcp or static? The marina wifi has IP of 220.127.116.11. Is this my default gateway IP? As I mentioned earlier it seems that getting an IP address/DHCP is what keeps causing my failure to connect with the marina wifi. With DHCP enabled I could connect when in Client Router mode, however the connection kept dropping. Right now everything seems to be working well in the connection status section, but I have no internet access when connected wirelessly to the engenius directly. Operation Mode: Client Router (plan to change to client bridge when I connect ens202ext to router later?) LAN: IP address 192.168.0.30, DHCP Server Enabled WAN: Connection type Static, IP Address 192.168.43.50, Default Gateway 192.168.43.1 (this is marina AP IP address) Connection Status-Wireless Associated, 78 MBps Connection Status-WAN Static IP, Status=UP, IP address 192.168.43.50 So everything above seems like it's humming along great but I'm getting no internet. Thanks for your reply if you can see a conflict in the above settings or have any other suggestions.
I am using a five year old ECOC2611P (FCC) LFP, S/N 122365251, firmware version 1.3.1, on my boat to connect to various marina wifi systems. Recently I am having difficulty connecting at some marinas using the EnGenius device where both IOS and Android cell phones auto connect easily. Most marina systems connect easily. I believe that my device is operating in DHCP Router, Client Mode. My questions are: Is there an EnGenius device that will auto connect like the cell phones? Is the problem outdated firmware, i.e. version 1.3.1? If so, how to I obtain an updated file? It seems that the tricky part of is getting the security settings appropriately configured. Most marinas use WPA2, WPA2-PSK, or NONE. I have tried various combinations of AES, TKIP, and other options that appear in the set up screens to no avail at one location in particular. The other oddity is that sometimes I do get connected at this on problematic location and the cell phones always connect there. Thanks in advance for for your solutions.