Jump to content

Alijalali

Members
  • Content Count

    88
  • Joined

  • Last visited

  • Days Won

    3

Everything posted by Alijalali

  1. The correct format of backup configuration file should be "backup-EAP1300-2018-10-24.tar.gz". When restore the configuration file you should upload the .gz file, no need to unzip it.
  2. You can try upgrade this latest firmware through 192.168.99.9~ https://www.engeniusnetworks.eu/download/file/fid/2454
  3. I think this function is not available yet.
  4. Hi Ron, Here you are. https://www.dropbox.com/s/dizmd1nqptggger/eap350-fcc-v1.5.27.0.bin?dl=0
  5. This may help. https://helpcenter.engeniustech.com/hc/en-us/articles/235197267-Why-is-it-that-I-cannot-view-my-EDS1130-IP-camera-through-Enviewer-
  6. Check this: What is RSSI and its acceptable signal strength?
  7. It should already fixed in latest firmware.
  8. My one with f/w v2.0.361, the "kick" function works fine for me.
  9. Yes, you can setup multi-SSID with untag vlan 1 on one SSID and tag vlan 30 on another SSID, only the isolation on vlan 30's SSID need to be checked. Where is the DHCP server located? Are they connected with managed switch?
  10. Did you uncheck the "Green" function next to the Operation Mode?
  11. After save, did you click the "Changes" on the top right hand corner and then click "Apply"?
  12. I think the ENH500 you have is v1 and the latest official firmware should be v1.5.6. v1.5.74.0 is for ENH500 v2.
  13. Will your smart phone or laptop able can get wifi signal from the office router when you are 500m away from the building? If not, you will need 2 ENH500, one for transmit another one for receive.
  14. You can set a static IP for the camera, or you can use "EnViewer Finder" tool to find the camera in your network (include IP information).
  15. Hi JonEdw, Try this link: http://www.engeniusnetworks.com/product/product.php?c=14&s=34&p=24
  16. Does the EnViewer APP access issue also happens when your mobile device is in the same local area network with camera or the issue only happens when you are at remote location?
  17. Where did you see the SD card option? So far as I know only Dome type camera has SD card slot.
  18. Once you create the AP profile and during system rebooting, you need to un-plug the LAN cable from the camera, then it will connect to your wireless AP automatically.
  19. Did you setup ENS202ext in AP mode ? The LED under signal indicator should only works in client bridge or WDS station mode.
  20. Would you like to share the network topology and the configuration of your EnStationAC first?
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.