Jump to content

GregM

Public
  • Content Count

    2
  • Joined

  • Last visited

Community Reputation

0 Neutral

About GregM

  • Rank
    Newbie

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Hi Mike, thanks for responding. Each unit is set to transmit at 26dBm. I went to the, "speed test" section on the tools page here's what I'm getting: Unit 1: ------------------------------------------------------------ Client connecting to 192.168.1.202, TCP port 5001 TCP window size: 16.0 KByte (default) ------------------------------------------------------------ [ 6] local 192.168.1.201 port 53161 connected with 192.168.1.202 port 5001 [ ID] Interval Transfer Bandwidth [ 6] 0.0- 5.0 sec 128 KBytes 210 Kbits/sec [ 6] 5.0-10.0 sec 128 KBytes 210 Kbits/sec [ 6] 10.0-15.0 sec 256 KBytes 419 Kbits/sec [ 6] 15.0-20.0 sec 128 KBytes 210 Kbits/sec [ 6] 0.0-20.0 sec 672 KBytes 275 Kbits/sec Unit 2: ------------------------------------------------------------ Client connecting to 192.168.1.201, TCP port 5001 TCP window size: 16.0 KByte (default) ------------------------------------------------------------ [ 6] local 192.168.1.202 port 33975 connected with 192.168.1.201 port 5001 [ ID] Interval Transfer Bandwidth [ 6] 0.0- 5.0 sec 256 KBytes 419 Kbits/sec [ 6] 5.0-10.0 sec 256 KBytes 419 Kbits/sec [ 6] 10.0-15.0 sec 128 KBytes 210 Kbits/sec [ 6] 15.0-20.0 sec 256 KBytes 419 Kbits/sec [ 6] 0.0-20.0 sec 932 KBytes 382 Kbits/sec
  2. Hello! I have some questions about setting up a pair of EnStationAC, as well as the WDS Bridge operation mode I guess. I'm trying to link two buildings on my family's farm that are about 1.28 miles apart as the crow flies. From all the lack of information I can gather from the internet, I think the WDS Bridge operation mode is what I'm looking for. I've installed the transceivers and have connectivity between them and since the signal LEDs don't light up when in WDS Bridge, I used a laser to do a, "rough fine focus," between each EnStation. Unfortunately, I'm getting terrible speeds and a signal of -60dBm. I've tried changing channels, increasing the transmitter power, and I am unable to do anything to make my connection better. I'm posting in hopes that somebody here may have some advice for me on how to make this better. I'm more than happy to try anything since the equipment is advertised to do 200Mbps at 1.5 miles which makes me feel like it's more operator error than anything else.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.