Jump to content

laireV

Moderators
  • Content Count

    338
  • Joined

  • Last visited

  • Days Won

    22

Everything posted by laireV

  1. Please see article posted on Help Center: https://helpcenter.engeniustech.com/hc/en-us/articles/115002037151-How-to-use-more-than-one-DURAFON1X-base-units-
  2. Please see article posted on help center: https://helpcenter.engeniustech.com/hc/en-us/articles/115002032411-How-to-Register-a-DURAFON1X-handset-to-a-DURAFON1X-Base-Station-
  3. Please see article posted on EnGenius Help Center: https://helpcenter.engeniustech.com/hc/en-us/articles/115002408631-How-to-change-and-add-user-login-on-EnGenius-EWS-Switch-
  4. Please see article posted on EnGenius Help Center: https://helpcenter.engeniustech.com/hc/en-us/articles/115002553411-How-to-optimize-wireless-bridge-after-deployment-
  5. Please article posted on EnGenius HelpCenter: https://helpcenter.engeniustech.com/hc/en-us/articles/115002314512-Can-I-make-two-way-radio-transmissions-while-someone-is-making-a-cordless-phone-call-
  6. Please see Article posted on EnGenius Help Center: https://helpcenter.engeniustech.com/hc/en-us/articles/115002314172-How-to-use-EnGenius-SN-ULTRA-AS-
  7. The ENH202 when configure as Access Point, it must be connected to a Router or DHCP server. The access point will only advertise IP address coming from the DHCP server or Router since it has no DHCP service. Best Regards
  8. Thanks for all the effort and finding in regards to the above issue. Yes you are correct, the IP setting of the ENS620EXT will become DHCP after updating to firmware version 1.0.0 c1.8.53. Rationale: So the EWS Controller and ezMaster can easily find, add, manage, and control the access point. I will forward this to the engineers for confirmation and possible manual revisions.
  9. Did you try flashing the firmware FWINFO-EAP1750H-FCC-v2.0.361-160519 to your EAP1750H then try downgrading the firmware.
  10. It is possible that the firmware you are trying to upload is not compatible with your hardware. As mentioned above the firmware version 3.0 has not released in the US, you may try contacting EnGenius Europe for compatible firmware for your EAP1750H. See below: EnGenius Networks Europe B.V. Esp 240 5633 AC Eindhoven The Netherlands Tel +31 40 8200 888 Operating Hours Monday - Friday (9am - 17:00pm) Closed on Saturday, Sunday & Public Holidays
  11. I see that you are having issues with your EAP1300EXT after updating its firmware to the latest build. Could you please let me know as to where you downloaded the firmware? It may perhaps a cache error on the browser? Have you tried clearing the browser histories, cache page, form data, password, offline sites, etc. then re-launch the browser? Have you tried using a different browser? You may also try pressing and holding the reset button for 1 minute while powered on. After a minute, release the reset button then disconnect the power for 10 seconds.
  12. I see. There is no other firmware release after 1.0.0.29. It has the same firmware as yours.
  13. Never had any issues updating the firmware of my ENS620EXT using the same exact procedure posted on the website.
  14. This should be the correct steps on how update the firmware of the ENS620EXT. At step 3. Perform a 30 second hardware reset (exactly 30 seconds).
  15. Please see article posted on EnGenius Help Center: https://helpcenter.engeniustech.com/hc/en-us/articles/115002197872-EnGenius-Advisory-on-the-WPA2-KRACK-vulnerability
  16. Spanning Tree Protocol (STP) is a network protocol that ensures a loop-free topology for any bridged Ethernet local area network. The basic function of STP is to prevent bridge loops and the broadcast radiation that results from them. Spanning tree also allows a network design to include spare (redundant) links to provide automatic backup paths if an active link fails, without the danger of bridge loops, or the need for manual enabling/disabling of these backup links. If you have multiple wireless bridges linked together, you can enable the STP for redundant path/link.
  17. Please see article posted on EnGenius Help Center: https://helpcenter.engeniustech.com/hc/en-us/articles/115001898012-How-to-determine-which-Base-Line-to-use-from-a-given-handset-on-DURAFON1X-system-
  18. Please see article posted on EnGenius Help Center: https://helpcenter.engeniustech.com/hc/en-us/articles/115001898032-Does-the-EnGenius-LPK-protect-against-direct-lightning-strike-
  19. No worries. This community forum is not only for US. Your post caught my attention so I did respond. Hopefully, EnGenius Europe would also find this interesting.
  20. I see. I honestly do not have any word from the engineering team here in the US. However if there will be v3.0 firmware for EAP1750H (US version), it will be posted on EnGenius US website.
  21. Yes. Where did you get your EAP1750H? Did you buy it from Europe or US? If you purchase it from US, it would be better using the firmware from the link that I provided.
  22. Does it say ETSI or FCC on the sticker?
  23. Thought so, EnGenius US do not have this firmware version. If your EAP1750H is from US, I encourage you install the firmware from US website.
  24. @onlyoneme Just curious, where did you get the firmware v3.0.0 for EAP1750H? EnGenius US do not have this version of firmware. For EAP1750H US version, firmware can only be downloaded from the link below: https://www.engeniustech.com/engenius-products/indoor-wireless-ceiling-ap-eap1750h/
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.